Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM 353

Created by: Thisisvamsi at: 9/27/2005 10:54 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/27/2005 10:54 AM	Rate (0)
Thisisvamsi Posts: 1 Rating: (0)	Why is the FM 353 Parameter window gets deactivated once the CPU turns into RUN state
Thisisvamsi Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/27/2005 8:41 PM	Rate (0)
Dreminee Posts: 58 Rating: (2)	Hello, the window is de-activated because the CPU takes over. If you set the simulation bit if you have programmed it, than the window stays activated. This way it operates with the FM357-2. Please try it. I think this will work too with the FM353. Best regards,
Dreminee Posts: 58 Rating: (2)
Suggestion To thank Quote Answer

10/20/2006 5:47 PM	Rate (0)
Willd Posts: 2 Rating: (0)	Hi! I have a problem whit the FM 353, that consist on the FM lost the velocity parameter, and the especific problem is taha tehe SDB don't keep this information, do you know if exist an especifict way to save this information??? because I try everythin whit the hardware config on the S7 300.
Willd Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/20/2006 10:23 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 8/24/2023 Posts: 4102 Rating: (193)	This question was already posted. Please look at here: FM 353 Parameters.
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on