Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FOR SCADA COMMUNICATION

Created by: patel at: 4/8/2009 1:42 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/8/2009 1:42 PM	Rate (0)
patel Posts: 134 Rating: (2)	HELLO.. I HAVE WONDERWARE INTOUCH 7.0 VERSION SCADA AND S7-300 CPU 314 IFM. I WANT TO COMMUNICATE BOTH APPLICATION THROUGH OPC OR DDE LINX.. IS THAT POSSIBLE WITH MPI TO USB ADAPTOR?? OR FOR THAT COMMUNICATION WHAT TYPE OF SOFTWARE AND HARDWARE I REQUIRE??
patel Posts: 134 Rating: (2)
Suggestion To thank Quote Answer

4/8/2009 2:58 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	Hello patel, MPI/USB Adptor and HMI - interesting but not possible. So, with other hardware - for example look at http://61.37.246.137/TECH/html/t001110.htm ( CP5611 + SimaticNetOPC server ). Or http://61.37.246.137/TECH/html/t000950.htm (OPCLink and CP -TCP on CPU side ). I suggest you to look at this examples, and decide in which way is better, give us more details about your PC - OS ...Your version of Intouch is old and I guess, it deppends from OS. If would be possible to install this hardware or should use other way... Hope this will helps. Best regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on