Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

free function blocks

Created by: hamid rad at: 11/6/2014 12:03 PM (3 Replies)

Rating (1)

Thanks 2

4 Entries

11/6/2014 12:03 PM	Rate (0)
hamid rad Posts: 41 Rating: (8)	hi there we have some S120 drive with CU320. how can i active all free function blocks?
hamid rad Posts: 41 Rating: (8)
Suggestion To thank Quote Answer

11/6/2014 12:11 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/8/2024 Posts: 22399 Rating: (3017)	Hello, open the properties of the Control unit and activate the Functionmodule "Free Blocks" Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hamid rad

11/8/2014 9:49 AM	Rate (0)
hamid rad Posts: 41 Rating: (8)	thank you Mr. ChristophD I activated "free function blocks" from CU and also Drive, but the parameter of logical gate are not available yet. (just an "AND" & an "OR" gates have been available) how can i find more gates?
hamid rad Posts: 41 Rating: (8)
Suggestion To thank Quote Answer

11/8/2014 2:56 PM	Rate (1)
Sinex1 Regular Member Joined: 4/20/2009 Last visit: 9/27/2023 Posts: 20 Rating: (4)	Hello, You need to activate (via properties on the drive object) the free function blocks offline in your project, and then download the project into your drive. Than you will have the free function blocks available. You will have a complete additional parameter list at the end of the expert list with all free function block parameters. The one AND and OR port are 2 ports which are present (to use on the brake control) and are always present.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hamid rad

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on