Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

G120 Actual_Current(telegram 352)

Created by: m19star at: 10/10/2019 1:50 PM (10 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

10/10/2019 1:50 PM	Rate (0)
m19star Regular Member Joined: 8/21/2012 Last visit: 2/9/2022 Posts: 23 Rating: (0)	I have SINAMICS G120 and CPU315-2. In display G120 I see "Actual Speed" and "Actual current" motor's. I want see "Actual Speed" motor and "Actual current" in TIA.(for scale in percents) I use Telegram 352 in TIA Portal v13. In FB10 “PZD_G120_Tel_352” I get value Actual Speed(#InData_word[2]) but don't get "Actual current"(#InData_word[3]). Help plz, how do i get the "Actual current" from motor(#InData_word[3])? See screen. Attachment G120.jpg (1179 Downloads)

Suggestion To thank Quote Answer

10/10/2019 2:20 PM	Rate (0)
RB91 Gold Member Joined: 4/28/2015 Last visit: 9/20/2022 Posts: 1278 Rating: (292)	Hi, I would first check the telegram interconnection on the drive side. Go online with your drive (Starter or Startdrive) and check out if at this PZD the current is connected and whether a value is displayed there. (you should see this in the mask for communication)
	Best regards, Robert
Suggestion To thank Quote Answer

10/10/2019 2:49 PM	Rate (0)
miami Platinum Member Joined: 8/31/2005 Last visit: 11/30/2023 Posts: 2196 Rating: (325)	Check you really have selected Tel 352 (six words) in TIA Portal , if you have selected Tel 1 (two words) it would look like you have it. As RB91 has posted, check in Starter or Startdrive what the drive sends in PZD3.

Suggestion To thank Quote Answer

10/10/2019 2:56 PM	Rate (0)
m19star Regular Member Joined: 8/21/2012 Last visit: 2/9/2022 Posts: 23 Rating: (0)	I may PZD3 monitoring only in startdrive? or TIA Porlal too?

Suggestion To thank Quote Answer

10/10/2019 3:00 PM	Rate (0)
RB91 Gold Member Joined: 4/28/2015 Last visit: 9/20/2022 Posts: 1278 Rating: (292)	Startdrive is installed to TIA Portal for commissioning drives. So it is integrated in TIA Portal if installed.
	Best regards, Robert
Suggestion To thank Quote Answer

10/10/2019 3:20 PM	Rate (0)
m19star Regular Member Joined: 8/21/2012 Last visit: 2/9/2022 Posts: 23 Rating: (0)	I have SINAMICS Startdrive in TIA. Where can I see what the drive sends to PZD3? RB91 Startdrive is installed to TIA Portal for commissioning drives. So it is integrated in TIA Portal if installed.

Suggestion To thank Quote Answer

10/10/2019 3:43 PM	Rate (0)
miami Platinum Member Joined: 8/31/2005 Last visit: 11/30/2023 Posts: 2196 Rating: (325)	Check/select telegram: Open Devices & Network, open the SINAMICS, doupleklick on the green PN interface. In the lower part of the windows select Siemens Telegram 352 (Bild1.png) View PZD3: Drive_1 > Parameter > Communication > Transmit direction (Bild2.png) > go online to view actual data Attachment Bilder.zip (508 Downloads)

Suggestion To thank Quote Answer

10/10/2019 3:51 PM	Rate (0)
RB91 Gold Member Joined: 4/28/2015 Last visit: 9/20/2022 Posts: 1278 Rating: (292)	see attached screen Attachment Comm.png (1129 Downloads)
	Best regards, Robert
Suggestion To thank Quote Answer

10/14/2019 1:40 PM	Rate (0)
m19star Regular Member Joined: 8/21/2012 Last visit: 2/9/2022 Posts: 23 Rating: (0)	RB91 see attached screen Thx for hepl! I decided it

Suggestion To thank Quote Answer

7/7/2022 6:00 PM	Rate (0)
CT91 Member Joined: 8/24/2016 Last visit: 11/7/2023 Posts: 1 Rating: (0)	tendrias que colocar el valor de corriente de referencia en la entrada del bloque FB para poder visualizar a la salida (reference current)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on