Navigation

G120 drive trip due to F08501 set point timeout

Created by: steel plant at: 8/26/2019 3:06 PM (1 Replies)

8/26/2019 3:06 PM	Rate (0)
steel plant Posts: 1 Rating: (0)	Hi I have facing some problem on Wire drawing machine ... Some time all G120 drive trip due to F08501 set point timeout so any one plz help ... ------------------------------------------------------------------------------------------ Split from G120, fault "1910: Fieldbus interface setpoint timeout ".
steel plant Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 08/27/2019 07:48:49 New subject after splitting
Suggestion To thank Quote Answer

8/27/2019 8:36 AM	Rate (0)
RB91 Gold Member Joined: 4/28/2015 Last visit: 10/22/2024 Posts: 1278 Rating: (301)	Hi, the fault says that the PN communication is stopped. Did you maybe download something to the PLC? Did the PLC go from RUN to STOP? How did you program the communication to the drives in the PLC user program? Which blocks do you use for the cyclic communication and in which OB do you call them?
	Best regards, Robert
Suggestion To thank Quote Answer