G120 hand mode indication

Hello

is it possible somehow to let know to the external PLC that the G120 drive is in HAND/AUTO mode (selected from BOP-2)?

I would expect to find a corresponding status bit within the drive but I can't.

hi,

we can control the hand/Auto mode selection of BOP from the PLC by assigning one Digital Output in PLC and it is to be wired to the control unit of the Drive.

So that we can select the hand/auto mode selction from PLC itself.

You can assign one Drive digital output as r807.So by using the status of the Particular Output we can let the PLC to identify whether Drive is in Hand mode.

Hi vidhyadharan

thank you for your comment.

"assigning one Digital Output in PLC and it is to be wired to the control unit of the Drive. So that we can select the hand/auto mode selection from PLC itself."

Could you please say to what parameter the "Hand/Auto" DI is connected in your drive?

I've also checked that "Hand/Auto" BOP button has no influence onto r807

Yes, this really does. It was my mistake.

Thank you very much!

hello,

The following parameter will help you to change the Hand Mode selection from the PLC.

you have to wire one Digital Input.You have to choose the parameter P806 and that should be assigned to one of Digital Inputs you wired.

For example if you are connecting your input at DI3 ,then you have to assign P806 to 722.3

I thing above one will help you to change the things