Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

G120- PM 240 INPUT SUPPLY

Created by: ajay1 at: 3/21/2014 1:21 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

3/21/2014 1:21 PM	Rate (0)
ajay1 Posts: 31 Rating: (0)	HELLO experts, I am using g120 training kit pm240 0.37kw in this kit there is no three phase supply input is given. but single phase (230v ac) to 400 v dc conversion components are given. here 400 vdc is given to L1,L2 terminals how it works any idea.... can we use all g120 drives like this input supply is possible........
ajay1 Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

3/22/2014 1:51 AM	Rate (0)
Deleted User Posts: 767 Rating: (69)	Hello stark 1, The method used for the demo to be powered is only sufficient enough to operate a very lightly loaded demo with a very small motor and only a small disc for a load. In actual applications the G120- PM240 must be provided input power per its catalog ratings and power input specified in hardware catalog per the part number. Best Regards, Deputy
Deleted User Posts: 767 Rating: (69)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ajay1

7/30/2014 4:39 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 8/24/2023 Posts: 4099 Rating: (193)	follow up question published by MTalaverais split to a seperate thread with the subject G120- PM 240 INPUT SUPPLY - Voltage Fault P210 incorrectely parameterized. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on