G120P on PROFINET, add manual jog switch

Hi all,

Quick question. I have a G120P being controller via PROFINET by a S7 1500.

We would like to add a switch to manually jog the motor, I have connected the switch to DI5. I am stumped by the amount of parameters.

Anyone has any pointers?

Thanks!

Hi all,

Received some excellent help from Siemens support, just wanted to share here. This solution works great for me!

You have to change the following parameters for this:

p810 = r722.5

p20158 = r54.15

p20159 = 50

p20161 = 5

p1055.1 = r20160

p1058 = gewünschte Drehzahl

After testing it, save the settings by setting p971 = 1 (this will reset to 0 when it is done saving.)