Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

GENOP 71 and Generator tripping

Created by: garethwilliams at: 5/7/2015 11:56 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/7/2015 11:56 AM	Rate (0)
garethwilliams Posts: 1 Rating: (0)	Good Morning All, Could the GENOP71 trip a generator randomly at load above 92%? Cheers, Gareth
garethwilliams Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/8/2015 8:15 PM	Rate (0)
Navnag Platinum Expert Joined: 11/21/2007 Last visit: 6/1/2023 Posts: 2321 Rating: (303)	Hello garethwilliams The GENOP will Trip the CB based on Over Current . Default setting is tripping at 110% of rated current ( With 30sec Time Delay ), However this can be adjusted by the user. Hope this helps Cheers Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

8/5/2015 9:59 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4812 Rating: (123)	New question published by kong is split to a separate thread with the subject Department is in charge of Genop71. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on