Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Getting speed controller inhibited

Created by: Eswarangowtham at: 12/17/2019 8:00 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/17/2019 8:00 AM	Rate (0)
Eswarangowtham Member Joined: 8/13/2019 Last visit: 6/22/2024 Posts: 4 Rating: (0)	ChristophD Hello, can you check the paramneter p856? This parameter was used for the bit30 an normaly is set to static "1". And refer the help to the parameter r46.30 to check other reasons for the missing signal. Regards Christoph Hello, Here i have attached my status word and control word bits. I am using s7-1200 and cu240e-2 drive with PROFINET communication , Getting speed controller inhibited, can you please suggest what to do. ------------------------------------------------------------------------------------------ Split from Bit 30 Speed controller inhibited. Attachment 2.JPG (104 Downloads)
	Last edited by: Jen_Moderator at: 12/17/2019 12:27:17 New subject after splitting
Suggestion To thank Quote Answer

12/17/2019 8:01 AM	Rate (0)
Eswarangowtham Member Joined: 8/13/2019 Last visit: 6/22/2024 Posts: 4 Rating: (0)	Eswarangowtham ChristophD Hello, can you check the paramneter p856? This parameter was used for the bit30 an normaly is set to static "1". And refer the help to the parameter r46.30 to check other reasons for the missing signal. Regards Christoph Hello, Here i have attached my status word and control word bits. I am using s7-1200 and cu240e-2 drive with PROFINET communication , Getting speed controller inhibited, can you please suggest what to do. Attachment 1.JPG (85 Downloads)

Suggestion To thank Quote Answer

12/17/2019 8:03 AM	Rate (0)
Eswarangowtham Member Joined: 8/13/2019 Last visit: 6/22/2024 Posts: 4 Rating: (0)	Eswarangowtham Eswarangowtham ChristophD Hello, can you check the paramneter p856? This parameter was used for the bit30 an normaly is set to static "1". And refer the help to the parameter r46.30 to check other reasons for the missing signal. Regards Christoph Hello, Here i have attached my status word and control word bits. I am using s7-1200 and cu240e-2 drive with PROFINET communication , Getting speed controller inhibited, can you please suggest what to do. Attachment 3.JPG (101 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on