Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

GPIO

Created by: AutoGen_959788 at: 8/4/2020 2:46 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/4/2020 2:46 AM	Rate (0)
AutoGen_959788 Regular Member Joined: 4/28/2015 Last visit: 8/1/2023 Posts: 37 Rating: (1)	Hello, What is the authoritative guide to the GPIO/Arduino shield? Is there an application used to configure the pins behaviour ? Or are all the pins fixed ? is the IO based on sysfs ? We need to provide access to the DI, DO, AI. Thanks D.

Suggestion To thank Quote Answer

8/4/2020 3:12 AM	Rate (0)
Madadi Bronze Member Joined: 12/28/2016 Last visit: 9/12/2023 Posts: 383 Rating: (42)	AutoGen_959788 Hello, What is the authoritative guide to the GPIO/Arduino shield? Is there an application used to configure the pins behaviour ? Or are all the pins fixed ? is the IO based on sysfs ? We need to provide access to the DI, DO, AI. Thanks D. Hi Here is the Siemens forum. To solve your problem, you should visit the ardoino site
	https://pnap.ir If this Information really helps, you could use the Rate function😉
Suggestion To thank Quote Answer

8/4/2020 8:10 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 9/25/2023 Posts: 3257 Rating: (367)	Hi, AutoGen_959788 Hello, What is the authoritative guide to the GPIO/Arduino shield? Is there an application used to configure the pins behaviour ? Or are all the pins fixed ? is the IO based on sysfs ? We need to provide access to the DI, DO, AI. Thanks D. you can configure the "behavior"/type of the pins using iot2050setup command. There go to Periphirals -> Configure Arduino I/O. Best regards!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2050 System

Follow us on