Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Graphic view

Created by: This Guy at: 7/30/2014 7:59 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

7/30/2014 7:59 PM	Rate (0)
This Guy Posts: 2 Rating: (0)	Hello All, I'm new to the world of Siemens. I have a job programing a S7-315 processor with a TP1200 hmi. I'm using S7 Simatic Manager for the plc and TIA v13 Portal for the hmi. I can communicate to both the plc and hmi. However, it appears that the plc and the hmi can not comunicate with each other. I can not see my hmi push button bits change state in Simatic Manager. I'm talking via ethernet to both. Thank you in advance,
This Guy Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/31/2014 9:02 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, do you use the "proxy-plc"? http://support.automation.siemens.com/WW/view/en/73502293 K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

7/31/2014 1:42 PM	Rate (0)
This Guy Posts: 2 Rating: (0)	K!ke, Thank you for the response! That was it and WOW that was easy. TIA Portal is pretty impressive software and I've only scratched the surface. Thank you very much,
This Guy Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on