Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Grid

Created by: Erikkr at: 6/7/2007 9:58 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

6/7/2007 9:58 PM	Rate (0)
Erikkr Posts: 3 Rating: (0)	Is it possible to use a grid or a chart in WinCC. I want to show some data from a Dbase III (.dbf) database
Erikkr Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

6/8/2007 6:26 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi please search this forum for "grid", I think there have already been some similar questions.. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/11/2007 2:13 PM	Rate (0)
Erikkr Posts: 3 Rating: (0)	Thank you but the problem is that when i use mshFlexgrid or other the message License information not found came on. I cann't find on this site or on another anything about this problem. For me it is not nescessary which grid-form i show but it must be done by a grid
Erikkr Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

6/11/2007 3:45 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	HI the microsoft ActiveX-componentscome e.g. with the installation of Microsoft Office. Did you install MS office on your WinCC PC as well? Please always install Microsoft office before installing WinCC. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/11/2007 9:56 PM	Rate (0)
Erikkr Posts: 3 Rating: (0)	Hi Thank i didn't install office but it works. Does anybody have examples with the office chart or spreadsheet I can fill the spreadsheet but it is far away from the way of a grid
Erikkr Posts: 3 Rating: (0)	Last edited by: Erikkr at: 11.06.2007 21:56
Suggestion To thank Quote Answer

9/10/2007 6:53 PM	Rate (0)
HoHei Posts: 2 Rating: (0)	Hi Nemo, we don't have office licenses on our customer PC's or my engeniring PC. Do i need office on all work stations? Or only at the development? With best regards Holger Nemo HI the microsoft ActiveX-componentscome e.g. with the installation of Microsoft Office. Did you install MS office on your WinCC PC as well? Please always install Microsoft office before installing WinCC. nemo
HoHei Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

9/11/2007 1:29 PM	Rate (0)
CromptonS Bronze Member Joined: 10/31/2006 Last visit: 9/21/2022 Posts: 134 Rating: (34)	Hi, I have WinCC V6.0 SP4. I never installed office or VB and I have the control. It may have been from the Simatec Net installation. The file name for this control is msflxgrd.ocx and should be in the windows\system32 directory.Insert a control from the smart objectsin graphics designer and see if it is there. If you have any visual studio disksyou can search for a file called vb6controls.reg, it is normally under the extras directory depending on the version. You can just double click this file and it will add the license information to the registry, and no need for office or installing full versions of vb. This will enable you to use it in the graphics designer as well regards Shane Attachment cntrl.JPG (189 Downloads)
	Last edited by: CromptonS at: 11.09.2007 14:41
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on