Navigation

gsd file for Cp1512

Created by: meghna at: 6/10/2009 3:02 PM (1 Replies)

Rating (1)

Thanks 0

2 Entries

6/10/2009 3:02 PM	Rate (0)
meghna Advanced Member Joined: 6/10/2009 Last visit: 8/29/2024 Posts: 16 Rating: (1)	Hi, I need GSD file for Cp1512 as i am not able to establish link between AS & OS with PLC sim. Thanks in advance

Suggestion To thank Quote Answer

6/10/2009 4:07 PM

Rate (1)

dchartier

Grandmaster-Expert

Joined: 9/27/2006

Last visit: 1/17/2025

Posts: 12330

Rating:

(2700)

Hello meghna;

Here is the description of the CP 1512, as it can be found on the Siemens Support site:

Product description

CP 1512 PC CARD (CARDBUS 32 BITS) FOR CONNECT. OF A PG/NOTEBOOK TO IND. ETHERNET (10/100MBIT/S) W. RJ 45 PORT VIA SOFTNET S7 AND SOFTNET PG, WITH DRIVER FOR MS WIN (32BIT) 98, ME, NT4.0 WS/SERVER (SYSTEM REQ.: CARDWIZARD SYSTEMSOFT V5.2), 2000 PRO/SERVER, XP PRO

The CP 1512 has been declared as "Product cancellation" status in 2006, by the way.

Since this processor card is used to connect a PC to Industrial Ethernet, and not to Profibus, a gsd file would be of no use to you [the gsd file is a vendor-independant configuration file required to setup a Profibus-DP slave to a DP master network, inside a Profibus configurator software].

Could you please explain more clearly what exactly you need, and what you wish to do? Maybe then we can be of more service.
Hope this helps,
Daniel Chartier

Share this page:

Share this page on...

gsd file for Cp1512

Created by: meghna at: 6/10/2009 3:02 PM (1 Replies)

Rating (1) Thanks 0

2 Entries

meghna

dchartier

2 Entries

Follow us on

Rating (1)

Thanks 0