Deep.The

Hy,

I have a weighing terminal from MESOMATIC, model DK800 with Profibus module installed. I want to include this terminal in my profibus network but i don't know how to configure it.

Please help.

 Hello

Hello please can you share me the GSD files of Mesomatic model DK800

------------------------------------------------------------------------------------------
Split from Mesomatic DK800 on Profibus.

Hello bicopaz;

There is not much information on Mesomatic on the web.

This link provides some information:

https://files.elektroda.pl/440652,dk800.html

3.2. GSD-File
The device data subscription files(GSD-files) for the DK800 form part of the delivery for the DK800 and are supplied on 3 1/2 " disks.
The name of the GSD-file is: DK800502.GSD
The parameters which are required by the DK800 are provided wholly by the device data subscription files. However, the data channels to be used must be selected.

The gsd file itself does not seem to be available on the web; you should try to contact the company directly. See the attached screenshot.

Hope this helps,

Daniel Chartier

Hi,

please read the answer above your post.

Best regards,
Noodles

Hello. Has anyone found a gsd file for mesomatic dk800, dk850?

 Hi,

read the topic completely then you have your answer 

dchartier

Hello bicopaz;

There is not much information on Mesomatic on the web.

This link provides some information:

https://files.elektroda.pl/440652,dk800.html

3.2. GSD-File
The device data subscription files(GSD-files) for the DK800 form part of the delivery for the DK800 and are supplied on 3 1/2 " disks.
The name of the GSD-file is: DK800502.GSD
The parameters which are required by the DK800 are provided wholly by the device data subscription files. However, the data channels to be used must be selected.

The gsd file itself does not seem to be available on the web; you should try to contact the company directly. See the attached screenshot.

Hope this helps,

Daniel Chartier