Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

H1 bus configuration between SPPA-T2000 and S7 AP

Created by: eemi at: 5/14/2008 1:04 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

5/14/2008 1:04 PM	Rate (0)
eemi Posts: 30 Rating: (0)	Every body I want to configure the H1 bus connection between the SPPA-T2000 and the S7 processor. So , please give me any information about the TxpS7Import.exe and *.xml files. Thanks
eemi Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

5/16/2008 12:45 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, well, let me see... About the TxpS7Import.exe I have no idea, where did you get this from? The XML File contains the configuration of the Connection from NetPro, actually you do not have to care about it anyway, it is only useable with SIMATIC NET drivers. If you want to use different drivers, you do not have to care about it. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

5/22/2008 7:22 PM	Rate (0)
Pandiani Bronze Member Joined: 10/31/2005 Last visit: 9/4/2024 Posts: 366 Rating: (31)	eemi, do you work with SPPA-T2000? I have seen applications where SPPA-T2000 is connected to S7 PLC through profibus and appropriate communication module. I could try to find more information if you're interested. I0m not really sure what type of communicatio H1 is? Can you give more details?

Suggestion To thank Quote Answer

5/22/2008 11:28 PM	Rate (0)
eemi Posts: 30 Rating: (0)	Dear Pandiani Connecting the SPPA-T2000 (TXP) via profibus to S7 PLC is a way that make the TXP card as I/O modules for S7 PLC. But I want to connect the S7 PLC system via H1 bus to the TXP anduse the S7systemas APin DCS. For configuring the bus parameters, it need to set many parameters like MAC address , remote I/O address , Local interface address & ... in S7 program. I know the .xml(that make in TXP) containneed parameters and must use in S7 programto configuring the bus parameters. But I want know , How I can make the .xml files from TXP anduse it in S7 program? I listen from someone can use TxpS7Import.exe .
eemi Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

7/3/2009 3:17 PM	Rate (0)
irkhaju Posts: 11 Rating: (2)	may be this artikel useful for you http://instrumentandcontrol.blogspot.com/2008/06/sppa-t2000-s5-communication-with-s7-ap.html
irkhaju Posts: 11 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mahmoudiran

4/10/2014 2:58 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/5/2024 Posts: 4114 Rating: (195)	follow up question published by AthosZAis split to a seperate thread with the subjectImplement a S7 Automation Processor within a S5 DCS. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on