Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Hard Disk type selection

Created by: Ehsan.nami at: 2/19/2024 10:53 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/19/2024 10:53 AM	Rate (0)
Ehsan.nami Experienced Member Joined: 9/27/2014 Last visit: 8/16/2024 Posts: 50 Rating: (1)	Dear All I have a question regarding hard disk type for engineering and operator stations. Is it ok to use SSD hard disk in industrial environment and IPCs? regards,

Suggestion To thank Quote Answer

2/20/2024 12:49 PM	Rate (0)
Swarley92 Experienced Member Joined: 8/12/2021 Last visit: 10/11/2024 Posts: 325 Rating: (30)	Hi! I think it depends on the IPC model, it is possible to order them with SSD type hard drives for use in an industrial environment. For example, IPC677E
	If this Information really helps, you could use the Rate function Best regards Swarley92
Suggestion To thank Quote Answer

2/21/2024 9:26 AM	Rate (0)
Ehsan.nami Experienced Member Joined: 9/27/2014 Last visit: 8/16/2024 Posts: 50 Rating: (1)	Thanks for your answer, but beside the ordering function, I want to know if is it ok and standard to use the SSD for industrial computers? As they say, they have lower write and read cycle, i wanted to know if it is acceptable to use them in industrial factories and facilities

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on