Hardware Configuration

Hello ladies and gentlemen,

I am developing the automation una machine with 100 points automation, 3 analog input (4 ~ 20mA), 5Analog Output (4 ~ 20mA), 57 Digital Input (24VDC, 12 points for encoder), 35 Digital Output ( 24VDC, 4 points for the encoder), have PID control temperature, frequency inverter control with encoder read, drive pneumatic solenoid valves ... I'm thinking of using a CPU 317F-2 PN / DP with the following settings:

PLC - CPU 317F-2 PN/DP 1 6ES7 317-2FK14-0AB0 / V3.2 SIEMENS

PLC - CP 343-1 LEAN 1 6GK7 343-1CX10-0XE0 / V2.2 SIEMENS

PLC - DP SLAVE ET200S 3 6ES7 151-1BA02-0AB0 SIEMENS

PLC - PM-E DC24V 5 6ES7 138-4CA01-0AA0 SIEMENS

PLC - DIGITAL INPUT MODULE - 8DI DC24V 5 6ES7 131-4BF00-0AA0 SIEMENS

PLC - DIGITAL INPUT MODULE - 4DI DC24V HF SUPPORTS CLOCKING 2 6ES7 131-4BD01-0AB0 SIEMENS

PLC - DIGITAL OUTPUT MODULE - 8DO DC24V/0,5A 1 6ES7 132-4BF00-0AA0 SIEMENS

PLC - DIGITAL OUTPUT MODULE - 4DO DC24V/2A ST SUPPORTS CLOCKING 6 6ES7 132-4BD31-0AA0 SIEMENS

PLC - DIGITAL OUTPUT MODULE - 4DO DC24V/0,5A ST SUPPORTS CLOCKING 1 6ES7 132-4BD01-0AA0 SIEMENS

PLC - COUTER MODULE - 1 COUNT 5V/500 kHz W FOR POSITION FEEDBACK 2 6ES7 138-4DE02-0AB0 W / V1.0 SIEMENS

PLC - ANALOG INPUT - 2AI 2/4WIRE HF 2 6ES7 134-4MB02-0AB0 SIEMENS

PLC - ANALOG OUTPUT - 2AO I HS 3 6ES7 135-4GB52-0AB0 SIEMENS

I would like to know the following items:

- This configuration will work for this applicationn?

- I know I need other equipment for the complete operation of the solution and what are these code for this configuration (such as PS)?

- There is a cheaper solution?

- What cables and connectors should I use?

- What HMI Touch indicates to me the process (of at least 7 ")?

Thanks

Dan.Amaral

I would like to know the following items:

- This configuration will work for this applicationn?

- I know I need other equipment for the complete operation of the solution and what are these code for this configuration (such as PS)?

- There is a cheaper solution?

- What cables and connectors should I use?

- What HMI Touch indicates to me the process (of at least 7 ")?

Thanks

I would like to know if you a searching for somebody that is doing your work free of charge? 

I'm new in the area of automation and I have no answer to these Questions

Dan.Amaral

I'm new in the area of automation and I have no answer to these Questions

Look here:

https://support.industry.siemens.com/tf/ww/en/posts/31917/

Dan.Amaral

I would like to know the following items:

- This configuration will work for this applicationn?

- I know I need other equipment for the complete operation of the solution and what are these code for this configuration (such as PS)?

- There is a cheaper solution?

- What cables and connectors should I use?

- What HMI Touch indicates to me the process (of at least 7 ")?

Thanks

hi Dan,

1. Nobody of us can know this. We don´t know your application at all and in detail.

2. When you need a PS, you have to count all the currents of the appliance. 

3. maybe, but I don´t know the site.

4. you should know, this depends on the environmetal conditions and the construction.

5. that depends on what you want to illustrate and your application. Mostly the costumer says what he wants.

summary:

this task can´t be done in a forum. We can´t give you a full solution in planning a Hardware Configuration. It is not possible for us to know everything that needs to pay attention. 

Sorry, for that,

regards,

Hello Dan,

You should contact your automation business developper in your region for that kind of request.

Do you really want to build an automation system with the opinion of people on a forum and support this project after?

Best regards,

Hugo