Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

have created tag in Data Block ins7-1200 but not able to access char bytes through absolute addressing

Created by: ZakirSayed at: 1/29/2011 10:15 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/29/2011 10:15 AM	Rate (0)
ZakirSayed Posts: 39 Rating: (0)	Sir I have created tag in Data Block ins7-1200 but not able to access char bytes through absolute addressing as u told. splitted from SO, how do you convert ARRAY[1..n] of CHAR to STRING? I know a work-around but why does it have to be so hard?.
ZakirSayed Posts: 39 Rating: (0)	Last edited by: O_Moderator at: 1/31/2011 8:35 AM new subject after splitting Last edited by: ZakirSayed at: 1/29/2011 10:17 AM
Suggestion To thank

1/29/2011 10:22 AM	Rate (0)
ZakirSayed Posts: 39 Rating: (0)	Sir I have created string tag in Data Block ins7-1200 but not able to access char bytes using absolute addressing.
ZakirSayed Posts: 39 Rating: (0)
Suggestion To thank

1/31/2011 8:38 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the following thread String to Charac Conversion In S7-1200. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on