Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

hello sir i have 2cpu s7 400 cpu 414-2 and 2 no cp443-1 and i want to communicate with s7 connection. see my problem

Created by: vijay sahadadpuri at: 10/18/2009 8:04 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/18/2009 8:04 AM	Rate (0)
vijay sahadadpuri Posts: 4 Rating: (0)	sir i have 2 cpu 414-2dp and 2 cp 443-1 when i down load in net pro.after download in netpro when i see in cp dignostic in operating mode found send receive data communication stop and not configure. so help me how ican configure it.give me example with pitcure if possible..
vijay sahadadpuri Posts: 4 Rating: (0)
Suggestion To thank

10/18/2009 11:29 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, well, your observations would be OK as long as you did not configure any ISO Transport, ISO on TCP, UDP or TCP connection. The only connectiontype that always works is the S7 Communication, as you surely already noticed in your CP special diagnistics. So I wonder, did you configure any communication connection in NetPro already? Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank

10/24/2009 6:33 PM	Rate (0)
vijay sahadadpuri Posts: 4 Rating: (0)	HELLO SIR I HAVE EARLIER COMMUNICATE 2 S7 400 CPU 414-2DP AND CP 443-1 WITH TCP/ IP PROTOCOL NOW I COMMUNICATE WITH S7 PROTOCOL AND IN THIS PROJECT I USE PUT GET SFB. IN THIS PROJECT ALL SHOW OK BUT IN NCM -CP DIGNOSTIC-OPERATING MODE- SEND RECEIVE COMMUNICATION SHOW STOP AND NOT CONFIGURE SO GUIDE ME HOW I CAN CONFIGURE IT
vijay sahadadpuri Posts: 4 Rating: (0)
Suggestion To thank

10/26/2009 10:18 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed because question is already published in the thread with the subject hi sir i have 2 s7400cpu and ethernat cp and i want to communicat with s7 connection . Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on