Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help! Creating faceplate with HMI KTP700

Created by: Step7_pro_pro at: 8/11/2015 8:11 PM (4 Replies)

Rating (2)

Thanks 1

5 Entries

8/11/2015 8:11 PM	Rate (0)
Step7_pro_pro Posts: 35 Rating: (0)	Hi everybody, I have question about creating faceplate in TIA. Here, I using HMI KTP700 on TIA with Wicc Basic. Like WinCC Professional, I created a screen is the control panel and in the root screen using a button to call it showing off by assigning bit. However, it does'nt work as i expected. You can view graphics: Thank you for reading! Attachment faceplate.png (490 Downloads)
Step7_pro_pro Posts: 35 Rating: (0)	Last edited by: Step7_pro at: 8/11/2015 8:12:28 PM Last edited by: Step7_pro at: 8/11/2015 8:13:34 PM
Suggestion To thank Quote Answer

8/11/2015 8:15 PM	Rate (0)
Step7_pro_pro Posts: 35 Rating: (0)	You can see "home screen" as graphic. Attachment Home screen.png (385 Downloads)
Step7_pro_pro Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

8/12/2015 6:50 AM	Rate (1)
William_B Posts: 5225 Rating: (1182)	^{Thinking out loud.. What is the functional differences between BASIC and COMFORT HMIs? Is it only scripting that makes these different?}
William_B Posts: 5225 Rating: (1182)
Suggestion To thank Quote Answer

8/12/2015 3:35 PM	Rate (1)
K!ke Posts: 1299 Rating: (135)	Hello, do you want to use a button next to the home screen button to show your motor data? they are defined in the template (in folder screen management) K!ke
K!ke Posts: 1299 Rating: (135)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users MOHSENM

8/13/2015 2:56 AM	Rate (0)
Step7_pro_pro Posts: 35 Rating: (0)	Thank for your suggestion! It stimulates thinking of me. :)
Step7_pro_pro Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on