Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

help for creating HMI

Created by: ect_09 at: 1/24/2014 9:19 PM (8 Replies)

Rating (1)

Thanks 1

9 Entries

1/24/2014 9:19 PM	Rate (0)
ect_09 Experienced Member Joined: 1/24/2014 Last visit: 3/13/2024 Posts: 119 Rating: (1)	Hello, i am newbie on this fourm. i read this fourm many time.here is the place where i found lot of help that make me ease to slove problems... #Respect for admins, (register today). now a days am using TIA PORTAL SP1, i am good with ladder logic...i want to creat HMI.. for example i have 3 input and 3 output..i knw little bit that button as input here and circles can be slect as output...but am unable to configure these button and circle... i need a document or tutorial which explain all the high lighted things and make me able to start from 0 level with HMI and go to advance level.. best wishes....!!!! Attachment m.jpg (243 Downloads)

Suggestion To thank Quote Answer

1/25/2014 10:09 AM	Rate (0)
S7 AUTOMAN Posts: 515 Rating: (56)	hi, have a look at the below links please. Further you can find lot of related links when searched. https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=54430386&caller=view https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=57185407&caller=view https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=40263542&caller=view /tf/WW/en/Posts/65701 /tf/WW/en/Posts/93693
S7 AUTOMAN Posts: 515 Rating: (56)	Last edited by: S7 AUTOMAN at: 1/25/2014 10:10 AM
Suggestion To thank Quote Answer

1/25/2014 7:39 PM	Rate (0)
ect_09 Experienced Member Joined: 1/24/2014 Last visit: 3/13/2024 Posts: 119 Rating: (1)	Thanks for reply, i made HMI for one input and one output..i configured it. but problem is here, when i press input button as shown in attachment it doesnt show out put( led not glow) , but when i give input from PLC sim IB0 then output block glow. (i dont have PLC , i just want to done simulation) kindly help me in this manners. Attachment new.jpg (234 Downloads)

Suggestion To thank Quote Answer

1/25/2014 8:39 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 1/15/2025 Posts: 5697 Rating: (715)	Hello, You can't set PLC inputs with HMI, they will be overwritten by the hardware input every cycle. So if you want to set an output with PLC input and your hmi, put a M-bit or DB-bit(set by HMI) in parralel with the PLC input. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

1/26/2014 7:38 AM	Rate (0)
ect_09 Experienced Member Joined: 1/24/2014 Last visit: 3/13/2024 Posts: 119 Rating: (1)	M bit mean memory flag???? i didnt understand your message. am explaining my point. (i) i dont have real PLC and HMI, that is the reason am interested to simulate them and to get working experience. (ii) i made a ladder logic for simple I0.0 and Q0.0 i.e i0.0 Q0.0 \|--\| \|-------------------------------------( )--\| then i go for HMI, select my panal. then creat button and config it with events "PRESS ==setbiot", then select event "RELEASE== reset" also tag these both event then i creat a square for LED indication .. so i select animation put tag there. when i simulate my HMI , button did nothing but when i input to ladder from simulation panel then LED change the colour as i did in animation set. what should i do that button should work for output LED.???

Suggestion To thank Quote Answer

1/26/2014 7:54 AM	Rate (1)
S7 AUTOMAN Posts: 515 Rating: (56)	hi, what Marcjan meant is, instead of using physical I/O adresses (I0.0, I0.1...), use memory adresses (M0.0,M0.1...)instaed so that you can simulate it from the HMI without getting overwritten. M0.0 M1.0 \|--\| \|-------------------------------------( )--\|
S7 AUTOMAN Posts: 515 Rating: (56)	Last edited by: S7 AUTOMAN at: 1/26/2014 7:55 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ect_09

1/26/2014 12:47 PM	Rate (0)
ect_09 Experienced Member Joined: 1/24/2014 Last visit: 3/13/2024 Posts: 119 Rating: (1)	Thank you so much...i done it.. please tell me how much M bit can be use ? i mean it range..??? (M0.0 to M99.9 ??).. ? and when i use timer then i need to set M bit with instead of time when am working with HMI??

Suggestion To thank Quote Answer

1/26/2014 1:13 PM	Rate (0)
S7 AUTOMAN Posts: 515 Rating: (56)	mehtabahmed Thank you so much...i done it.. please tell me how much M bit can be use ? i mean it range..??? (M0.0 to M99.9 ??).. ? and when i use timer then i need to set M bit with instead of time when am working with HMI?? hi, please tell me how much M bit can be use ? it depends upon the capacity of the CPU you use. Additionally you can also use the DB adresses.(usually we dont have this problem of memory bits limitation) and when i use timer then i need to set M bit with instead of time when am working with HMI?? i din understand your question. But if you want to simulate somthing using the PLC sim, its better to use the memory adresses rather than the physical addresses and if you have a real PLC with the respective I/O's, then you might use the physical I/O's as well based on the requirement.(not that you need to only use memory adresses)
S7 AUTOMAN Posts: 515 Rating: (56)	Last edited by: S7 AUTOMAN at: 1/26/2014 1:14 PM
Suggestion To thank Quote Answer

3/15/2014 11:43 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/22/2025 Posts: 4114 Rating: (195)	follow up question published by Rajnish%is split to a seperate thread with the subject KTP600 besic colour DP - how i can upload program from runing HMI and then download to new fresh HMI. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on