Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

[Help] G120C Profinet and S7-1200

Created by: eregibispo at: 9/12/2013 12:39 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/12/2013 12:39 PM	Rate (0)
eregibispo Posts: 15 Rating: (0)	Hi. I have to develop a new project with a S7-1200 CPU, three G120C drives and a KTP600 HMI. The devices are part of a Profinet net. Now, my problem is to properly configure the system (with TIA Portal V12 and Startdrive) to allow the PLC to manage the G120C drives because in the G120C manuals i found nothing So, i'm asking if there are some kind of tutorials to: a. parametrize the drives via Startdrive; b. parametrize the PZD telegrams via TIA Portal. Thanks in advance.
eregibispo Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

9/12/2013 1:41 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/4/2023 Posts: 21951 Rating: (2927)	Hello, a) on the left side under each G120C is the "Parameter" item. Double click an in the working area the commissioning wizard can be started. With this wizard you can parametrizeoffline the G120C. b) open the Device View of a G120C in the last Windows in the working area is a tab "General" navigate to "PROFIET interface" -> "Cyclic data exchange" now here you can configure the used telegramms to communicate with the S7-1200. with the Items "Actual Data" and "Setpoint" you can configure the addresses. Regards Christoph

Suggestion To thank Quote Answer

9/12/2013 2:16 PM	Rate (0)
eregibispo Posts: 15 Rating: (0)	ChristophD Hello, a) on the left......... b) open the ......... Regards Christoph Ok, thanks, i know this... But i'm lookin' for an application example which can step by step explain me what (and how) parameters to configure (PLC & drives) in the project. Thankyou again.
eregibispo Posts: 15 Rating: (0)	Last edited by: eregibispo at: 9/12/2013 2:19 PM
Suggestion To thank Quote Answer

9/12/2013 2:26 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/4/2023 Posts: 21951 Rating: (2927)	such examples? http://support.automation.siemens.com/WW/view/en/70155469 http://support.automation.siemens.com/WW/view/en/56749384 http://support.automation.siemens.com/WW/view/en/64877108

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on