Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help me about start simulation with CPU S7 1200

Created by: laiduong5989 at: 5/23/2012 8:00 AM (15 Replies)

Rating (1)

Thanks 3

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

5/23/2012 8:00 AM	Rate (0)
laiduong5989 Posts: 4 Rating: (0)	I have got a CPU S7 1200 1214 DC/DC/DC but i haven't got panel HMI KTP 1000. How do you do simulation on HMI panel.Thanks
laiduong5989 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

5/23/2012 8:14 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (998)	Just start Runtime on your configuration PC that is connected to PLC.
IBN-Service Posts: 8946 Rating: (998)
Suggestion To thank Quote Answer

5/23/2012 10:31 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 11/6/2023 Posts: 2957 Rating: (242)	Select HMI with mouse and then 'Online -> Simulation -> Start'
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

5/23/2012 2:17 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (998)	Darius Select HMI with mouse and then 'Online -> Simulation -> Start' No, I would not prefer the "Simulation mode" if I have already a CPU connected!
IBN-Service Posts: 8946 Rating: (998)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Darius

5/23/2012 2:21 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 11/6/2023 Posts: 2957 Rating: (242)	IBN-Service Darius Select HMI with mouse and then 'Online -> Simulation -> Start' No, I would not prefer the "Simulation mode" if I have already a CPU connected! Aha you mean better is just to go for straight runtime ? Well if its not RT, but HMI I always use simulator
	Best regards, Darius
Suggestion To thank Quote Answer

5/23/2012 2:24 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 11/6/2023 Posts: 2957 Rating: (242)	Now I check and it seems you will not start runtime for HMI
	Best regards, Darius
Suggestion To thank Quote Answer

5/23/2012 2:27 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (998)	Darius Now I check and it seems you will not start runtime for HMI Sorry, cant get you.... I work with KTP1000 in Runtime mode on a normal PC, online connected to real PLC. It works fine, no problem, "KTP1000" was running on PC very well.
IBN-Service Posts: 8946 Rating: (998)
Suggestion To thank Quote Answer

5/23/2012 2:46 PM	Rate (1)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/23/2023 Posts: 1500 Rating: (221)	IBN-Service Darius Now I check and it seems you will not start runtime for HMI Sorry, cant get you.... I work with KTP1000 in Runtime mode on a normal PC, online connected to real PLC. It works fine, no problem, "KTP1000" was running on PC very well. Hello IBN-Service, I have worked in this similar setup with TP 1500 Basic and it was working fine without any issue.
	Like it? Rate it!
Suggestion To thank Quote Answer

5/23/2012 2:46 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 11/6/2023 Posts: 2957 Rating: (242)	IBN-Service Darius Now I check and it seems you will not start runtime for HMI Sorry, cant get you.... I work with KTP1000 in Runtime mode on a normal PC, online connected to real PLC. It works fine, no problem, "KTP1000" was running on PC very well. Let me explain with attachment Attachment explanation.jpg (562 Downloads)
	Best regards, Darius
Suggestion To thank Quote Answer

5/23/2012 6:32 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (998)	Funny. I never had this problem. Attachment Never.jpg (531 Downloads)
IBN-Service Posts: 8946 Rating: (998)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv System functions/Scripting

Follow us on