Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help me!! Is there a way to change the default setting for SFC view on Wincc??

Created by: moppet at: 3/3/2008 2:50 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

3/3/2008 2:50 PM	Rate (0)
moppet Member Joined: 8/14/2007 Last visit: 3/17/2009 Posts: 6 Rating: (1)	Hello All, Could anybody help me? In my project, if I change the WinCC runtime to SFC view, the default status is the whole overview of the sequence(Hardware is TDC, and we use CIS_CK version is V08.04.02). That means the view is very small, and we have to zoom in the view each time when we change the picture to SFC View, It's not convenient. And the sequence is located on the left side of the picture, not in the middle. Is there anything I can do for moving the whole sequence from the left to the middle? I tried but I didn't find where is the setting for the default view size. Could you help me? Thanks a lot. Moppet Attachment SFCView.JPG (41 Downloads)
	Last edited by: moppet at: 03.03.2008 16:23
Suggestion To thank Quote Answer

3/6/2008 1:26 PM	Rate (1)
April Posts: 1776 Rating: (95)	Hi, can you use the information in the FAQ http://support.automation.siemens.com/WW/view/en/364046
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

3/6/2008 4:58 PM	Rate (0)
moppet Member Joined: 8/14/2007 Last visit: 3/17/2009 Posts: 6 Rating: (1)	Thank you. I solved my problem. Moppet

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on