Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help on module SM 334 | 6es7 334-0ce1-0aa0

Created by: pmbmwtf at: 12/2/2009 10:13 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/2/2009 10:13 PM	Rate (0)
pmbmwtf Posts: 10 Rating: (0)	Hello, everybody I need to receive a signal from one equipment with the range -10V-0-10V. I'm wondering if i can conect the signal to V0+ and M0 to V1+ adn M1to the ground. Where: (V0+) - Gate 2 of Input Channel 0 - Signal; (M0) - Gate 3 of Input Channel 0 - SC to V1+; (V1+) - Gate 5 of Input Channel 1 - SC to M0; (M1) - Gate 6 of Input Channel 1 - GND; I think that isn't a problem because the channel are isolated, but can i do this Short Circuit without having a problem of damage the module? Thanks for the help. Sincerely, pmbmwtf
pmbmwtf Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

12/4/2009 9:36 PM	Rate (0)
pmbmwtf Posts: 10 Rating: (0)	Hello, I know the solution i bought an SM 331 module and my problem was solved. Thanks for the help. Sincerely, pmbmwtf
pmbmwtf Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

10/13/2014 3:54 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4793 Rating: (123)	New question published byHaridas Achuthan is split to a separate thread with the subject Problem while configuring analog output. Analog module 334. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on