Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help PID Block

Created by: f.arslan at: 6/16/2011 3:35 PM (8 Replies)

Rating (0)

Thanks 0

9 Entries

6/16/2011 3:35 PM	Rate (0)
f.arslan Posts: 63 Rating: (0)	Hi, I have a project. I used PLC 1214C which order number 6ES7-214-1AE30-OXB0 in this project. I have a problem in PID block, As you will see in attachment screen pictures, I can't see any value from output adress. And theerror adressfrom PID block has a number. What is meaning this value. Is there any problem with PID block. I'm waiting for your reply, Best regards, F.Arslan Attachment 2.JPG (186 Downloads)
f.arslan Posts: 63 Rating: (0)
Suggestion To thank Quote Answer

6/16/2011 5:29 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear F. Arslan, With according to the attached pic it seems that the error code "800" means sampling time error. Please refer to the system manual: https://support.automation.siemens.com/WW/llisapi.dll/49915587?func=ll&objId=49915587&objAction=csView&ClusterID=41737332&nodeid0=34612486&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=content Chapter 10.2 Also refer to the attached pic. Have fun. Tomy. Attachment PIDError.GIF (173 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

6/16/2011 5:43 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Sorry, The link was for the manual update, here is the right link: https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&objid=34612486&treeLang=en Hope this will help. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

6/17/2011 4:46 PM	Rate (0)
f.arslan Posts: 63 Rating: (0)	Thanks a lot, I changed the cyle time of main OB. PID block hasn't any error value, it is ok. But in auto select there isn't any output value. When i sent the manuel value, it is running. What is the problem. It is about PLC version. Best Regards. F.ARSLAN
f.arslan Posts: 63 Rating: (0)
Suggestion To thank Quote Answer

6/18/2011 6:06 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Would you please send us a pic of your configuration. Have luck. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

6/29/2011 3:58 PM	Rate (0)
f.arslan Posts: 63 Rating: (0)	Hi Tommy, My problem about PID is keeping on. I send you my configuration and output value of PID block. Please help me anyone, or send me just PID project example. Best Regards. F.ARSLAN Attachment configuration.JPG (171 Downloads)
f.arslan Posts: 63 Rating: (0)
Suggestion To thank Quote Answer

6/29/2011 3:59 PM	Rate (0)
f.arslan Posts: 63 Rating: (0)	This is second picture: Attachment manuel.JPG (164 Downloads)
f.arslan Posts: 63 Rating: (0)
Suggestion To thank Quote Answer

6/29/2011 4:00 PM	Rate (0)
f.arslan Posts: 63 Rating: (0)	3. Picture Attachment automatic mode.JPG (168 Downloads)
f.arslan Posts: 63 Rating: (0)
Suggestion To thank Quote Answer

6/30/2011 11:25 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear f.arslan, Please refer to the link /tf/WW/en/Posts/33957#top I hope it will find. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on