Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

[ HELP ] SM 338 POS Module

Created by: esantos at: 2/19/2014 10:18 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

2/19/2014 10:18 PM	Rate (0)
esantos Experienced Member Joined: 11/17/2010 Last visit: 10/9/2024 Posts: 105 Rating: (2)	Hello everybody!! Please... Can anyone help me please ? How many absolute encoders can I connect to SM 338 Pos Module ? I`m not sure but I think that we can connect 3 encoders... is it correct ? And I can get the pulse counter from each one simultaneous ? On page 4 of PDF file from this link : http://cache.automation.siemens.com/dnl/Dc/Dc0NTY5NQAA_21145879_HB/pi_sm388_e.pdf I can see 3 enconders... is it correct ? Thanks a lot !!! Best regards Ed san
	Last edited by: esantos at: 2/19/2014 11:54 PM Last edited by: esantos at: 2/19/2014 11:53 PM Best regards, Eduardo
Suggestion To thank Quote Answer

2/20/2014 9:35 AM	Rate (1)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	Hello, How many absolute encoders can I connect to SM 338 Pos Module ? I`m not sure but I think that we can connect 3 encoders... is it correct ? yes you can connect 3 absolute encoders. And I can get the pulse counter from each one simultaneous ? You can read the 3 positions simultaneous. Regards, Marcjan
	Last edited by: Marcjan at: 2/20/2014 9:36 AM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users esantos

2/20/2014 12:37 PM	Rate (0)
esantos Experienced Member Joined: 11/17/2010 Last visit: 10/9/2024 Posts: 105 Rating: (2)	Hi Marcjan Thanks a lot for your help !!! Best Regards, Ed san
	Best regards, Eduardo
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on