Navigation

Help to properly mount mPCI for LTE and GPS

Created by: AutoGen_1455872 at: 3/21/2023 2:40 PM (1 Replies)

3/21/2023 2:40 PM	Rate (0)
AutoGen_1455872 Member Joined: 11/5/2021 Last visit: 6/29/2023 Posts: 5 Rating: (0)	Hi all, I recently ordered a mPCI card to install on my IOT2050. My goal is to use LTE and pick up geolocation on the IOT2050. As you can see in the picture, I only have the mPCI board, no antennas came in the order. Should I order the antennas separately to be able to use LTE and GPS? If so, which antennas are tested/recommended? Thank you. Attachment mpci.png (56 Downloads)

Suggestion To thank Quote Answer

3/22/2023 9:16 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 9/25/2023 Posts: 3256 Rating: (367)	Hi, you need antennas for LTE and GPS. A2TDI had some information about that here. I can't really recommend antennas, it always depends on the frequency used in your location for LTE etc. Maybe there is some entries here in the fourm by users who shared their experience with antennas. Otherwise you would to check maybe on the vendors webpage of your card, which antennas could fit. Best regards!

Suggestion To thank Quote Answer