Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help what has to be done?

Created by: rdoliveira at: 7/1/2013 3:55 PM (2 Replies)

Rating (0)

Thanks 3

3 Entries

7/1/2013 3:55 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 9/13/2024 Posts: 1553 Rating: (167)	Problem with "cyclic connection"? Attachment Error cyclic connection.jpg (62 Downloads)
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/1/2013 4:08 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 9/13/2024 Posts: 12282 Rating: (2683)	Hello Ricardo; Please describe the steps that you went through to setup Profinet communications with your drive. Can you ping the drive and your PLC from your programming PC? Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

7/1/2013 8:07 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 9/13/2024 Posts: 1553 Rating: (167)	ping does not respond, but found the faulty cable. thank you
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users S_Moderator dchartier Vithani

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on