Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help with ADI4

Created by: MecoMatic at: 4/15/2009 5:25 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/15/2009 5:25 PM	Rate (0)
MecoMatic Advanced Member Joined: 4/2/2007 Last visit: 12/3/2022 Posts: 16 Rating: (0)	Hi, I´m looking for a manual for the ADI4 board. The Siemen´s code are 6FC5211-0BA01-0AA2 and 6FC5211-0BA01-0AA3 The thing is I can´t replace the 0AA2 with the 0AA3. I just search this in the site but I couldn´t find it. Thanks!!!
	Last edited by: MecoMatic at: 4/15/2009 5:27 PM
Suggestion To thank Quote Answer

4/15/2009 6:03 PM	Rate (0)
Gebhardt Karl Platinum Member Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	Hi Take this here. http://support.automation.siemens.com/WW/view/en/10805166/133300 You have only a newer Hardware-Version.
	Karl
Suggestion To thank Quote Answer

9/11/2009 3:07 PM	Rate (0)
MecoMatic Advanced Member Joined: 4/2/2007 Last visit: 12/3/2022 Posts: 16 Rating: (0)	Thank you very much

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on