Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

help with recipies in a MP277

Created by: AlexVC69 at: 2/22/2010 4:11 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/22/2010 4:11 PM	Rate (0)
AlexVC69 Posts: 2 Rating: (0)	Good day: I have a little trouble with the advanced view of recipies in runtime with a MP277, the trouble I have is: when I configure the advanced view of recipies in my proyect and it is compiled with success, then I execute the simulator of the panel MP277 and the advanced view of recipies doesn't appears, but if I configure the simple view of recipies it appears in the runtime. Could someone help me with this, how can I make the advanced view appears in runtime?. And finally a little question...how many is the maximum number of recipies can I have or create in a MP277? Beforehand thanks.
AlexVC69 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/23/2010 2:36 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 5/16/2023 Posts: 8586 Rating: (1127)	AlexVC69 ... I have a little trouble with the advanced view of recipies in runtime with a MP277, the trouble I have is: when I configure the advanced view of recipies in my proyect and it is compiled with success, then I execute the simulator of the panel MP277 and the advanced view of recipies doesn't appears, but if I configure the simple view of recipies it appears in the runtime. Could someone help me with this, how can I make the advanced view appears in runtime?. Hi, Could it be that the Advanced view of Recipies is not complete situated in screen? AlexVC69 And finally a little question...how many is the maximum number of recipies can I have or create in a MP277? When you use a MP277: Recipes 300 Data records per Recipe: 500 Entries per datarecord: 1000 Recipe memory: 64 Kbyte integrated flash, expandable. Best regards, Wizard

Suggestion To thank Quote Answer

2/25/2010 4:50 PM	Rate (0)
AlexVC69 Posts: 2 Rating: (0)	Thanks for respond Wizard. But the advanced view follows without appearing... because I have the view almost at the same size (a little smaller) of the screen and doesn't apperars, there is no other reazon for that it could be happening? inclusively I have created a new proyect in the WinCC Flexible and add again the advanced view of recipies but the problem persists. And other question.....how can I create new recipies in runtime? because in runtime is possible to create new registers, but no recipies. There are some way to make this?. Thanks for your quick answer and for your help.
AlexVC69 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/26/2010 9:12 AM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (120)	Hi, it is not possible to create recipies in runtime regards,

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on