Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Hide TAb with layers = "~" does not work in iDB

Created by: dineshJ at: 2/12/2019 12:41 PM (4 Replies)

Rating (1)

Thanks 0

5 Entries

2/12/2019 12:41 PM	Rate (0)
dineshJ Posts: 12 Rating: (2)	Hide TAb or chapter card with script Tab.layers = "~" does not work in iDB
dineshJ Posts: 12 Rating: (2)
Suggestion To thank Quote Answer

2/14/2019 8:21 AM	Rate (0)
Wouter den Haan Experienced Member Joined: 4/9/2018 Last visit: 11/10/2022 Posts: 72 Rating: (31)	Uhm, yes it does. Sorry for the short answer, but without more context, that's all I can offer. From help: Invisible attributes: "~" working area If attributes in the engineering view are not to be visible either in the Navigator or in the tab, define this via the "~" working area (layers). In the base project, the attributes are still visible for the administrator.

Suggestion To thank Quote Answer

2/15/2019 8:19 AM	Rate (0)
dineshJ Posts: 12 Rating: (2)	But still in engg. project, while doing it through script Layers="~" it shows error message that its read-only Tab
dineshJ Posts: 12 Rating: (2)
Suggestion To thank Quote Answer

2/15/2019 8:35 AM	Rate (1)
Otso77 Advanced Member Joined: 5/15/2017 Last visit: 3/11/2024 Posts: 40 Rating: (15)	Hi, you need to first inheritcheckin the tab/attribute before setting the properties if it is untouched (inheritd) Cheers. Otso

Suggestion To thank Quote Answer

2/15/2019 11:58 AM	Rate (0)
dineshJ Posts: 12 Rating: (2)	thank you
dineshJ Posts: 12 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on