Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

High Speed Counter Help

Created by: Robinson30 at: 8/30/2018 2:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/30/2018 2:09 PM	Rate (0)
Robinson30 Experienced Member Joined: 10/15/2016 Last visit: 1/30/2023 Posts: 77 Rating: (1)	Hi, First time ever programming a HSC and having no luck. It is a very simple situation I just want channel 0 to pulse count to a set value. I have the module recieving pulsing on channel 0 from an encoder but having no luck actually getting that information into the software. I know to some of you this is basic stuff but I am lost. Does anyone have a very basic program I can follow? The siemens examples wont open in V15. Thank You All Once again sorry for such a basic question.

Suggestion To thank Quote Answer

8/30/2018 5:51 PM	Rate (0)
#dP Posts: 2826 Rating: (659)	The first one on the list should be very helpful: LINK: LIST
#dP Posts: 2826 Rating: (659)
Suggestion To thank Quote Answer

8/30/2018 9:32 PM	Rate (0)
Robinson30 Experienced Member Joined: 10/15/2016 Last visit: 1/30/2023 Posts: 77 Rating: (1)	Thank you, finally got the examples to work on Tia V15. I think i have done it correctly need to test it tomorrow.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC High Speed Counter (HSC)

Follow us on