7/12/2017 10:27 AM | |
Joined: 12/28/2016 Last visit: 12/22/2023 Posts: 364 Rating: (6) |
I Can see that the input from HMI can reach to the LOGO! , Buth there is one more thing to be done to link the ouptut (q2 -q6 ) of the LOGO1! --HMI , LOGO2!--HMI , LOGO3!--HMI, LOGO4!-HMI
AttachmentlogoHMI-needtounzip.zip (317 Downloads) |
With kind regards... |
|
7/12/2017 10:44 AM | |
Joined: 12/28/2016 Last visit: 12/22/2023 Posts: 364 Rating: (6) |
i found logo driver under connections |
With kind regards... |
|
7/12/2017 12:02 PM | |
Joined: 12/18/2014 Last visit: 8/30/2024 Posts: 33647 Rating: (4182)
|
Here the new Version with mapped outputs to HMI over LOGO! 1. AttachmentEngine_Alarm_1-4_V2.zip (246 Downloads) |
This contribution was helpful to1 thankful Users |
7/12/2017 1:45 PM | |
Joined: 12/28/2016 Last visit: 12/22/2023 Posts: 364 Rating: (6) |
i can tag these bit by bit to the HMI please see the attached screenshot
AttachmentDesktop.zip (256 Downloads) |
With kind regards... |
|
7/12/2017 2:12 PM | |
Joined: 12/18/2014 Last visit: 8/30/2024 Posts: 33647 Rating: (4182)
|
Here the changed version with only 4 signals from the HMI for all 4 LOGO! S. And yes, you can directly used the V addresses of the LOGO! by the settings of the HMI variables. AttachmentEngine_Alarm_1-4_V3.zip (289 Downloads) |
This contribution was helpful to1 thankful Users |
Follow us on