Dear Cumulus

does the converter from int to real work well? instead of script

Best regards

Mohammad  

cumulus

Hi David,

you have 2 options here:

1. "Linear Scaling" option in Tag-Properties (But you have still INT)
example: 123 gets into 12 (Scaling 0-1000 PLC | 0-100 HMI)

2. If you need the decimal digit:
- create an internal "REAL" Tag
- create a script (like this)
SmartTags("RealTag") =  SmartTags("IntTag")/10

- call script in "Scheduled Tasks", f.e. each 1 second
-then you simply display the Real Tag-Value in RT Prof

Regards,
cumulus

------------------------------------------------------------------------------------------
Split from How to display an INTEGER as a REAL format (with coma) in I/O Field.

Hello Mr.Khalifa,

please be so kind and don't post twice or more for the problem.
Thanks.

You post also here, 7th reply:

https://support.industry.siemens.com/tf/ww/en/posts/shifting-decimal-places/135734/?page=0&pageSize=10#post856364

 Dear ixo

i post twice because each one suggest a different solution and no one of them is clear to me so i want to understand

but in general for my information is there any rule prevent that? 

ixo65

Hello Mr.Khalifa,

please be so kind and don't post twice or more for the problem.
Thanks.

You post also here, 7th reply:

https://support.industry.siemens.com/tf/ww/en/posts/shifting-decimal-places/135734/?page=0&pageSize=10#post856364

 Dear cumulus

i like to share you the test of int to real converter that it is working too without problems

thanks a lot

regards 

mohammad

cumulus

Hi David,

you have 2 options here:

1. "Linear Scaling" option in Tag-Properties (But you have still INT)
example: 123 gets into 12 (Scaling 0-1000 PLC | 0-100 HMI)

2. If you need the decimal digit:
- create an internal "REAL" Tag
- create a script (like this)
SmartTags("RealTag") =  SmartTags("IntTag")/10

- call script in "Scheduled Tasks", f.e. each 1 second
-then you simply display the Real Tag-Value in RT Prof

Regards,
cumulus

Closed cause question posted twice.

The second thread with the subject Can't find HMI data type is published within the conference SIMATIC WinCC (TIA Portal).

Best regards

Jen_Moderator