Shahadat96

Dear Expert,

Good morning.

I need some suggestion.

I want it to see the green when I press the EntMag button. Then clamp the machine through the pedal switch. Then EntMag starts. The button color will change to gray when EntMag is finished. how can i do it In the event I have selected Invertbit but it is not working. Only the Color Changed Once EntMAG started.

Originally published in the Simatic S7-1200 conference.

The configuration of the appearance is of importance (see figure 1). Best to show per screen capture what you have in the event and the display. Consider if you are using another tag or the tag you triggered with the button.

Figure 1. Change background colour of a button.

Note that the "0" state is not needed in figure 1.