Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

HMI Simatic vs GE fanuc Versamax Micro 64 PLC

Created by: lufego at: 5/28/2011 2:03 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/28/2011 2:03 PM	Rate (0)
lufego Advanced Member Joined: 6/20/2008 Last visit: 12/6/2024 Posts: 14 Rating: (0)	Hi, i need to communicate a HMI Simatic with a Versamax Micro 64 PLC + ethernet module. This module support protocols SRTP and Modbus TCP (server). How can I configure myHMI in order to be able to communicate. Thanks

Suggestion To thank

5/28/2011 3:06 PM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	I don't think you can communicate your GE Fanuc PLCs through SIMATIC HMIs. Earlier WinCC Flexible was having the communication drivers for GE Fanuc but now it has reduced to only four. If you want to communicate your GE Fanuc PLCs, then you have to do it through S7 PLC and then show it to SIMATIC HMI
Niranjan Prasad Posts: 691 Rating: (37)
Suggestion To thank

5/29/2011 10:21 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/28/2025 Posts: 4114 Rating: (195)	closed cause question posted twice. The second thread with the subject WinnCC Flexible coomunication with GE versamax micro PLC is published within the conference SIMATIC WinCC flexible. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on