Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

HMIRuntime.BaseScreenName does not work

Created by: automatinglego at: 3/20/2009 3:22 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

3/20/2009 3:22 PM	Rate (0)
automatinglego Posts: 14 Rating: (0)	hi Iwant to change the screens by using vb code "HMIRuntime.BaseScreenName = "PictureNameX" it works very well in wincc 6.2 when opening the same project with wincc 7.0 Iget the debug error "HMIRuntime.get_BaseScreenName: No such interface supported." so how canI solve this problem? thanks.
automatinglego Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

3/27/2009 2:38 PM	Rate (0)
Sadeghian_ASE Posts: 5 Rating: (0)	Hi, Based on what you said I think that you want to change your current window picture to a picture you want. The best way is to use "direct connection". Assume for example you have got a button, in its events, right click on "Press Left" (for example) and point to "Direct Connection". Then set "Source" to "Constant" and choose your desired picture. Also set "Target", "Current Window" with Property "Picture Name". Best, Sadeghian
Sadeghian_ASE Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/2/2009 9:58 AM	Rate (0)
automatinglego Posts: 14 Rating: (0)	thanks for your answer but i forget to mention that i must use script to change the active picture because i use top menu bar and the only way to change the picture is using script. there is no problem with the direct connetction method in my project.
automatinglego Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

4/3/2009 11:17 AM	Rate (0)
automatinglego Posts: 14 Rating: (0)	hi I installed wincc v7.0 sp1 and my problem is solved. best regards.
automatinglego Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

5/26/2009 10:56 AM	Rate (0)
abc1234 Member Joined: 3/24/2009 Last visit: 2/15/2012 Posts: 1 Rating: (0)	just for general information: I had the same problem, butwith WinCC V7.0 SP1. The Problem was solved after executing "SIMATIC Security Control". Sven

Suggestion To thank Quote Answer

6/15/2018 1:44 PM	Rate (0)
The Helping Hand Moderator Joined: 8/21/2014 Last visit: 9/14/2023 Posts: 736 Rating: (12)	New question published by Alvaro palen is split to a separate thread with the subject HMIRuntime.baseScreenName object doesn't work. Best regards The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards The HelpingHand
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on