Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Hotkeys initially not working under WinCC V 7.0

Created by: knetzi at: 8/11/2008 2:08 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

8/11/2008 2:08 PM	Rate (0)
knetzi Posts: 3 Rating: (0)	Hi, I'm using the hotkey-property of standard buttons together with picture windows for implementing a navigation framework. Under WinCC6.2 this works fine. Since using version 7.0 the hotkeys don't work until any one of the buttons was served by mouse initially. After that the hotkeys work fine, again. Could anybody help? Regards knetzi
knetzi Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/29/2008 10:36 AM	Rate (0)
Runis Experienced Member Joined: 4/23/2007 Last visit: 12/17/2021 Posts: 75 Rating: (8)	Sounds like there is a hotkey conflict, this can occur. What might be the thing is that there is a system object with the same hotkey as you have defined. Just as a test try changing your hotkey to something else and see if it works then. If the new hotkey is working then it probably is a conflict and you should find which object is causing it. R.
	Runis
Suggestion To thank Quote Answer

8/29/2008 1:18 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/6/2023 Posts: 2957 Rating: (242)	Hello, Is this project initially created on v7.0 ir it was converted from v6.2 ?
	Best regards, Darius
Suggestion To thank Quote Answer

11/21/2008 11:00 AM	Rate (0)
JMK Posts: 1 Rating: (0)	I'm having the same problem as knetzi with a multiple screen project that has been migrated from V6.2 to V7.0. I have sorted it with a line of VB attached to the Open Picture Event that activates the screen. I am just curious as to why thiswas not a problemwith V6.2but iswith V7.0? Regards, JMK.
JMK Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/14/2009 5:10 PM	Rate (0)
Mel Bronze Member Joined: 12/27/2007 Last visit: 11/30/2023 Posts: 128 Rating: (1)	Hi all I seem to have a similar problem it seems that I have to click in the active picture window before thehotkey will workis there a way to make the window active on opening it from another window and thus make the hot key available without havingto click in the window Regards Mel

Suggestion To thank Quote Answer

6/15/2009 9:28 AM	Rate (0)
Runis Experienced Member Joined: 4/23/2007 Last visit: 12/17/2021 Posts: 75 Rating: (8)	You could for instance have a script on "OpenPicture" where you use the Set_Focus() function to place focus on something in your picture. I.e. if it is a standard PCS 7 faceplate, perhaps you could use the "View" object which is in all. R.
	Runis
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on