Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How 2 Integrate Aalrm_8P to a FB

Created by: Sergio_08 at: 7/14/2008 11:51 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/14/2008 11:51 AM	Rate (0)
Sergio_08 Posts: 4 Rating: (0)	How can I integrate the bloc Alarm_8P to a FB (that I have created)such the the alarms associated with my FB are automatically sent toWinCC. What are the procedures behind?
Sergio_08 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/15/2008 10:33 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (278)	Please read chapter 16 - Configuring Messages in the following manual: Programming with STEP 7 V5.4 Main stepinvolved is, you need to call SFB35 in your FB and provide appropriate triggers and other parameters. Remember the following: 1. Parameter ID should be W#16#EEEE 2. You should have a DWord input parameter in your block with attributes S7_a_type=alarm_8p and S7_server=alarm archive Attached is sample source. Attachment STL_Alarm_8P.ZIP (144 Downloads)
Phantom75 Posts: 2661 Rating: (278)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on