how can connect two RTU together with IEC61850

hi, 

I want to connect two RTU together one as client and one as server, but i cant use PCM600 to mapping client-server for them and then i cant prepare the SCD file...

actually i cant to connect two iec61850 Line of RTUtil in PCM600..

can everybody help me???

Hello fzemj;

Isn't PCM600 a software designed and distributed by ABB as part of their distribution grid controls?

https://new.abb.com/medium-voltage/distribution-automation/engineering-tools/protection-and-control-ied-manager-pcm600

Is there any chance that you might find better support on the ABB site?

Or asybe the Youtube videos on PCM600 could provide the required information:

https://www.youtube.com/watch?v=9MeXYuHUcCs

Hope this helps,

Daniel Chartier

Hi dear dchartier..

thanks for your interaction

I can connect relays to RTU in client-server configuration in PCM600.. but not for two Line61850 of RTU...

Is it possible to i do this with digsi?

Hello fzemj;

What make and model are your RTU?

DIGSI is designed to work with Siprotec relays (from Siemens Energy).

This document contains information on communication over IEC 61850 with DIGSI 4 and Sirotec relays, it can provide guidance:

Ethernet & IEC 61850 startup

Hope this helps,  

Daniel Chartier 

Thank you for your guidance dear Daniel 

actually my RTUs are RTU560..

Hello fzemj;

The RTU560 is a ABB product. ABB shows there is a communication unit for the RTU560,the 560CMR02:

https://new.abb.com/products/1KGT036300R0001/communication-unit-cmu-for-rtu560-6-serial-ports-2-ethernet-ports

and the license you would need for IEC 61850 (IEC 61850 server or client) on the 560CMR02 is detailed here:

https://new.abb.com/products/1KGT201645R0011/basic-license-sd-card-560cmr01-560cmr02

Further information must be asked from ABB support.

Hope this helps,

Daniel Chartier

Mike J

Hi

if by vertical communication you mean just the RTU and Siprotec, you don't have to import the CID again to Digsi. Siprotec doesn'T need any kind of information from the client, apart from IP Address, if you want to restrict it.

If you want to exchange GOOSE messages between devices, then you need to import the CID from ABB into Digsi.



Mike

Hi dear Mike,

i want to connect ABB rtu and 7sj to eachother. i prepare cid of 7sj with rcb in Digsi and then export it to pcm. then in pcm i combined it with RTU cid, and finally i import SCD to RTUtill, but it dose not work properly and is inoperable?

can you guide me? Is there a need to import the cid file of RTU into Digsi? when and where i should enter the IP of RTu in Digsi?

is there need to have client in this picture?