Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How can I convert Double Screen to Single Screen in INTOUCH HMI

Created by: mosleuzzaman at: 11/9/2012 9:47 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/9/2012 9:47 PM	Rate (0)
mosleuzzaman Posts: 3 Rating: (0)	Dear all, 1. Suppose I have a backup of Intouch Application which is now running in Double Monitor. I want to see the application on only one monitor....... what I have to do ???? 2. In Intouch Application I have a Bendotti Furnace HMI now running with PCDDE Server with specialised hardware (driver) with PC, I want to use new PC and Intouch with NetDDE Swerver and want to run existing application backup(without PCDDE and Driver)..is it possible ??? Thx... Mosleuzzaman
mosleuzzaman Posts: 3 Rating: (0)	Last edited by: mosleuzzaman at: 11/9/2012 9:57 PM
Suggestion To thank Quote Answer

11/12/2012 9:33 AM	Rate (0)
Moldi Posts: 89 Rating: (7)	Hello! INTOUCH is a HMI software from Wonderware - not supported by Siemens. Sorry for that. http://global.wonderware.com/DE/Pages/WonderwareInTouchHMI.aspx regards
Moldi Posts: 89 Rating: (7)
Suggestion To thank Quote Answer

11/12/2012 7:43 PM	Rate (0)
mosleuzzaman Posts: 3 Rating: (0)	Dear Moldi , I am using SIEMENS PLC (S7 400) for Furnace automation with INTOUCH HMI. Thx for ur reply.
mosleuzzaman Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/12/2012 8:48 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 1/22/2025 Posts: 12330 Rating: (2702)	Hello mosleuzzaman; So we can help you here with any problems you have on the PLc. But for Intouch HMI we have no expertise, this is a product from another manufacturer. With any luck you might find a member on the forumwho has worked with this product, but I would still contact Wonderware for more help. Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

1/4/2013 7:35 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	mosleuzzaman Dear all, 1. Suppose I have a backup of Intouch Application which is now running in Double Monitor. I want to see the application on only one monitor....... what I have to do ???? Mosleuzzaman Start Intouch, select your application and open Intouch Maker. Then you will see a message: "Blabla..resolution is...do you want to convert?" Eventually Yes! Do you wan to make a backup of existing? Yes! Specify where to save the backup...and that's it. mosleuzzaman 2. In Intouch Application I have a Bendotti Furnace HMI now running with PCDDE Server with specialised hardware (driver) with PC, I want to use new PC and Intouch with NetDDE Swerver and want to run existing application backup(without PCDDE and Driver)..is it possible ??? Mosleuzzaman Basically it is possible to change the 'connection way'. But then you must update all topics definitions in Intouch and eventuallu the Items syntax. What kind of special hardware is using there? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on