Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How can I gives the Analog input Address for AI 8 x 12bits?

Created by: BhimLama at: 4/26/2012 9:05 AM (39 Replies)

Rating (0)

Thanks 15

Result pages:: |; 1 | 2 | 3 | 4; |

40 Entries

Entries per page: 10 | 20 | all

4/26/2012 9:35 AM	Rate (0)
BhimLama Posts: 13 Rating: (0)	Dear Expert, My CPU is 315-2 PN/DP (315-2EG10-0AB0)
BhimLama Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/26/2012 9:36 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, Please make a screen shot off the hardware too. With adresses and settings off the module. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BhimLama

4/26/2012 9:41 AM	Rate (0)
BhimLama Posts: 13 Rating: (0)	If i change my address to%IW306 to %IW306:P, its says syntax error.
BhimLama Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/26/2012 9:44 AM	Rate (0)
BhimLama Posts: 13 Rating: (0)	Device configuration Attachment window1.jpg (439 Downloads)
BhimLama Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/26/2012 9:47 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	BhimLama If i change my address to%IW306 to %IW306:P, its says syntax error. Do you use Step-7 or do you use Step-7 V11 (TIA portal) ? Ah ok.. I see from screen shot that it's TIA
	Last edited by: Darius at: 4/26/2012 9:48 AM Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BhimLama

4/26/2012 9:50 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	BhimLama If i change my address to%IW306 to %IW306:P, its says syntax error. I can't understand how you get syntax error ? Look attached. Attachment ScreenHunter_17 Apr. 26 10.49.jpg (447 Downloads)
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BhimLama

4/26/2012 10:01 AM	Rate (0)
BhimLama Posts: 13 Rating: (0)	hello, Is it possible to have problem with software?
BhimLama Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/26/2012 10:10 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	Could you post some screenshow with those errors visible ? Now I even have no idea about what error we are talking
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BhimLama

4/26/2012 11:45 AM	Rate (0)
BhimLama Posts: 13 Rating: (0)	Hello This the error shown, when I try to load the program. Attachment window2.jpg (475 Downloads)
BhimLama Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/26/2012 1:02 PM	Rate (0)
BhimLama Posts: 13 Rating: (0)	Hello, Do the hardware configuration effects in the programming? I means, do the analog module must be near the CPU and then digital modules? Any Idea about this?? Kiitosh.
BhimLama Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

40 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on