Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How disabling Safety in ET-200 M

Created by: Clodoaldopuc at: 8/28/2011 9:58 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/28/2011 9:58 PM	Rate (0)
Clodoaldopuc Posts: 16 Rating: (0)	Dear Colleagues I need testing I/O in ET-200M with fail safe moduls 6ES7 326-1BK02-0AB0 and 6ES7 326-2BF10-0AB0. The I/O´s are not connecting with sensors or changes .I need only testing if they are ok. In the past I constructed the program for ET-200 S and disabled safe mode for forcing the output but in this case I do not know how doing that. I attached the program that I used in the past for ET200 S and the program that I use now for ET 200 M. Could you see my program Test_Smu and compare with the last program Cpu41_1, for fixing Test_Smu to me use for testing?I need too know how do that in steps( Transfer to CPU by s7-distributed safety button, desable safe mode...)because safety is not easy. Attachment Test_smu.zip (338 Downloads)
Clodoaldopuc Posts: 16 Rating: (0)	Last edited by: Clodoaldopuc at: 8/28/2011 10:07 PM I will give five stars if the person could help me Last edited by: Clodoaldopuc at: 8/28/2011 10:05 PM Last edited by: Clodoaldopuc at: 8/28/2011 10:05 PM I will create other request for send the last program in ET-200 M Cpu 41 Last edited by: Clodoaldopuc at: 8/28/2011 10:02 PM
Suggestion To thank Quote Answer

8/28/2011 10:16 PM	Rate (0)
Clodoaldopuc Posts: 16 Rating: (0)	Program that I did in the past Attachment Cpu41__1.zip (296 Downloads)
Clodoaldopuc Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on