Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How do convert Library from Step 7 V5 to TIA Portal?

Created by: Tranhieu0983 at: 1/22/2012 2:03 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/22/2012 2:03 AM	Rate (0)
Tranhieu0983 Bronze Member Joined: 9/24/2010 Last visit: 4/21/2024 Posts: 118 Rating: (10)	Dear Expert and Tia Portal User When we use Step 7 so easy and when we change to using Tia Portal. I make some Library for Step 7. But i want to use it for Tia Portal. So, How can we convert Library when Program don't have Migrate for Library? Can you help me more by the way i need to do for convert Library from Step 7 to TIA Portal? P/S: Before i ask your advices. I make a new project and then i copy all library to my project, after then i convert this project, and the end i copy all of that library to TIA Portal for made new library. But i think it take so long time. Can you help me new way, new change for converting. Thank and Regard all of you :)
	Mechatronic Center Website: www.plcvietnam.com.vn Email : tvhieu.plc@gmail.com
Suggestion To thank Quote Answer

1/26/2012 11:40 AM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 1/13/2025 Posts: 1921 Rating: (136)	Hello, please see the FAQ in refer to migration of STEP 7 V5 projects in the internet (Entry-ID: 56314851) and see the point 8 in this FAQ. Regarding to the performance, consider the project should be consistent before you migrate. With best regards Cicero

Suggestion To thank Quote Answer

3/5/2012 6:28 AM	Rate (0)
Tranhieu0983 Bronze Member Joined: 9/24/2010 Last visit: 4/21/2024 Posts: 118 Rating: (10)	Thank you so much. Migrate Project from V5.5 to TIA Portal it's ok. But with Lib didn't have, because when convert you must have file .S7g type project of S7. But Lid didn't have. How convert them? I make LIB to a Project and CONVERT Project to TIA Portal and then using Drag and Drop to make a new project. ^^. and body has another technical? Thank you so much and sory about my English not good so much.
	Mechatronic Center Website: www.plcvietnam.com.vn Email : tvhieu.plc@gmail.com
Suggestion To thank Quote Answer

7/20/2015 1:58 PM	Rate (0)
RafaFerreira Regular Member Joined: 6/19/2009 Last visit: 9/29/2023 Posts: 2 Rating: (0)	Hello, Migration of libraries from STEP7 to TIA V11 is not possible according to the siemens document attached(page 6). TIA V13 I also couldn't. To solve the problem I hat do make a project in step7 and migrate the library through it. Same way Tranhieu0983. Best luck. Attachment Portal_V11_Migration_Webinar_en.pdf (770 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on