How integrate SFB35 into SCL code

Hi experts,

In theese days im working to integarte the SFB35 into an existing FB writed with SCL, but im facing some problem to figure it out how to integrete it.

First of all, i've followed the attached procedure in order to test the SFB35, and it's worked, but when i've tryed to include the SFB35 in my FB (wrote in SCL), i haven't been able to found a correct way to make work it.

I've read different posts in the forum, but without success.

SCL code:

 FUNCTION_BLOCK "Mot"
TITLE ='Motor' { S7_m_c := 'true'}
AUTHOR : 'CA'
FAMILY : 'Drive'
NAME : 'Mot'
VERSION : '1.0'
KNOW_HOW_PROTECT




// Block Parameters
VAR_INPUT
MsgEvId1 { S7_server := 'alarm_archiv'; S7_a_type := 'alarm_8p' }: DWORD ;    //Message Event ID
END_VAR

VAR_IN_OUT

END_VAR

VAR_OUTPUT

END_VAR

VAR
Alarm_8P_1 : SFB35;
END_VAR

VAR_TEMP

END_VAR


BEGIN

Alarm_8P_1.EV_ID:=MsgEvId1;
Alarm_8P_1.ACK_STATE:=W#16#FFFF;

END_FUNCTION_BLOCK

Could anyone explane me how could i fix it?

Thanks.

Regards.

Duccio.

Hi to everyone,

Problem Solved , it was just a wrong assignement.

Below the correct integration of the SFB35 with SCL.

VAR_INPUT
MsgEvId1 { S7_server := 'alarm_archiv'; S7_a_type := 'alarm_8p' }: DWORD ;    //Message Event ID

END_VAR

VAR_IN_OUT

END_VAR

VAR_OUTPUT
State { S7_m_c := 'true'}:INT:=0;
done:BOOL;
error:BOOL;
status:WORD;
ack_state:WORD;
END_VAR

VAR
Alarm_8P_1 : SFB35;
sig1:BOOL;
sig2:BOOL;
sig3:BOOL;
sig4:BOOL;
sig5:BOOL;
sig6:BOOL;
sig7:BOOL;
sig8:BOOL;
sd1:REAL;
sd2:REAL;
sd3:REAL;
sd4:REAL;
sd5:REAL;
sd6:REAL;
sd7:REAL;
sd8:REAL;
END_VAR

VAR_TEMP

END_VAR


BEGIN

Alarm_8P_1(//EN_R:=
SIG_1:=sig1,
SIG_2:=sig2,
SIG_3:=sig3,
SIG_4:=sig4,
SIG_5:=sig5,
SIG_6:=sig6,
SIG_7:=sig7,
SIG_8:=sig8,
ID:=W#16#EEEE,
EV_ID:=MsgEvId1,
//SEVERITY:=
SD_1:=sd1,
SD_2:=sd2,
SD_3:=sd3,
SD_4:=sd4,
SD_5:=sd5,
SD_6:=sd6,
SD_7:=sd7,
SD_8:=sd8);


done:=DONE;
error:=ERROR;
status:=STATUS;
ack_state:=ACK_STATE;

END_FUNCTION_BLOCK

Regards.

Duccio