Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how PN I/O module status resd

Created by: Import-User-1 at: 4/6/2010 1:14 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/6/2010 1:14 PM	Rate (0)
Import-User-1 Gold Member Joined: 8/10/2005 Last visit: 2/7/2022 Posts: 3609 Rating: (28)	Import of a Technical Question of an User boopathi@sequent wrote: hello, i am using s7400 cpu 412dp with et200m im153-4 pn io.How to read module status.Please help me

Suggestion To thank Quote Answer

4/6/2010 7:57 PM	Rate (0)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (303)	Hello, If you don't have a CPU with profinet interface (you speak about a 412dp, and not about a pn/dp CPU), you will need a communication processor in the configuration (CP443-1) The exact type of the required CP depends on the CPU version (V4 or V5) Are you using a CP?
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer

4/17/2010 2:00 PM	Rate (0)
boopathi@sequent Posts: 79 Rating: (0)	thanks, yes i am using cp 443-1 advanced .
boopathi@sequent Posts: 79 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on