Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How the signal convert between the 840DI and ADI4?

Created by: Tom_Li at: 2/6/2009 4:59 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/6/2009 4:59 AM	Rate (0)
Tom_Li Posts: 72 Rating: (0)	Dear all, As we know we can use 840Di+ADi4+611A to build a system. Profibus connect 840Di and ADI4 module, and ADi4 output 0-10V to 611A. My question is: 1.What's NC parameters(MD) using in 840Di system to occures signals to ADi4 with Profibus? 2.I also want to know how the 0-10V signal outputaccording to the NC parameters? Would you pls give me a detail description? Thank you in Emergency.
Tom_Li Posts: 72 Rating: (0)
Suggestion To thank Quote Answer

5/24/2015 8:45 AM	Rate (0)
SRITN Bronze Member Joined: 3/25/2012 Last visit: 7/14/2023 Posts: 99 Rating: (3)	Hi Tom. i am also having this same doubt..have u got ur Answer?

Suggestion To thank Quote Answer

5/24/2015 11:35 AM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 12/7/2022 Posts: 594 Rating: (78)	Manual 840Di Manual ADi4

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on