Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to change heading (in attachment top of the heading ) of protocol or report of Siemens SIWAREX WP231?

Created by: rubelmia at: 9/14/2018 11:52 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/14/2018 11:52 AM	Rate (0)
rubelmia Posts: 1 Rating: (0)	how to change heading(in attachment top of the heading ) of protocol or report of Siemens SIWAREX WP231. HMI model Siemens TP700 Comfort ------------------------------------------------------------------------------------------ Split from Data logging & data reporting with TP700 Comfort HMI. Attachment 21617509_10214106653607061_4524620549869986378_n.jpg (115 Downloads)
rubelmia Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 9/14/2018 1:49:42 PM New subject after splitting
Suggestion To thank Quote Answer

9/14/2018 3:10 PM	Rate (0)
ABenno Posts: 206 Rating: (22)	Hi rubelmia, the protocol is not made by the Siwarex WP231. The protocoll is created by a Report of the Panel. To Change that you go in TIA-Portal to HMI/Reports, there you should find the report template and can change it. See screenshot. Regards ABenno Attachment Report.jpg (129 Downloads)
ABenno Posts: 206 Rating: (22)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on